SME32
Value Choice for HDD-to-SSD Upgrade
The SME32 SATA III 2.5” SSDs make a timely debut as many must be considering a replacement or upgrade of their HDDs. A highly efficient operating environment is readily put in place as SME32 delivers sequential read/write speeds of up to 450 MB/s and 250 MB/s respectively. SME32 is available in capacities of 120GB/240GB, it supports the SATA 3.1 interface.
  • High sequential speed: up to 450MB/s(read); 250MB/s(write)
  • Support SATA 3.1 (6Gb/s)
  • Powerful wear leveling algorithm to enhance lifetime
  • High level of BCH ECC to prevent data error
  • Health monitor by S.M.A.R.T
  • Shock and vibration resistant
  • Noiseless, operating without audible sounds
  • Low power consumption: power consumption is less than traditional desktop HDD.
  • High reliability: MTBF-1.5 million hours
  • 3 Years Warranty

Physical

  • Interface: SATA III 6GB/s
  • Form Factor: 2.5”
  • Capacity: 120GB/240GB
  • Dimension: 100.0mm(L)x69.85mm(W)x7.0mm(T) 
  • Weight: 71g (max.)


Environmental

  • Operating Temp.: 0~70℃
  • Storage Temp.: -40~85℃
  • Shock Resistance: 1500G/ 1.0ms

Performance

  • Sequential Speed: 


        - 240GB up to 450MB/s
        - 120GB up to 450MB/s

  • Sequential Write:


        - 240GB up to 250MB/s
        - 120GB up to 250MB/s

Power Consumption

  • Voltage: DC 5V +/-5%
  • Active: 

        - 240/120GB: 2W(max.)

  • Idle: 240/120GB: 0.5W(max.)
  • DEVSLP: < 5mW

Reliability

  • Wear-leveling: Strongly Wear-leveling
  • MTBF (Mean Time Before Failure): 1.5 million hours
  • Data Protection: 55 bit BCH ECC 
  • Product Health Monitoring: S.M.A.R.T
  • Data Retention: 10 years
  • Warranty 3 years
  • Compliance: CE, FCC, BSMI, RoHs
Project Note File Size Update Download