SME35 Xvalue
Value Choice for HDD-to-SSD Upgrade
The SME35 SATA III 2.5” SSDs make a timely debut as many must be considering a replacement or upgrade of their HDDs. A highly efficient operating environment is readily put in place as SME delivers sequential read/write speeds of up to 540 MB/s and 300 MB/s respectively. SME35 is available in capacities of 60GB/120GB/240GB/480GB, it supports the SATA 3.1 interface.
•High sequential speed: up to 540MB/s(read);  300MB/s(write)
•Support SATA 3.1 (6Gb/s)
•Powerful wear leveling algorithm to enhance lifetime
•High level of BCH ECC to prevent data error
•Health monitor by S.M.A.R.T
•Shock and vibration resistant
•Noiseless, operating without audible sounds
•Low power consumption: power consumption is less than traditional desktop HDD.
•High reliability: MTBF-1.2 million hours
•3 Years Warranty
 
Physical 
 Interface SATA III 6GB/s
 Form Factor 2.5”
 Capacity 60GB/120GB/240GB/480GB
 Dimension 100.0mm(L)x69.85mm(W)x7.0mm(T) 
 Weight 71g (max.) 
 Environmental 
Operating Temp.0~70℃
Storage Temp.-40~85℃
Shock Resistance1500G/ 1.0ms
Performance 
Sequential Read 
480GB up to 540MB/s
240GB up to 540MB/s
120GB up to 540MB/s
60GB up to 450MB/s
Sequential Write
480GB up to 300MB/s
240GB up to 300MB/s
120GB up to 150MB/s
60GB up to 75MB/s
Power Consumption 
VoltageDC 5V +/-5%
Active
480/240GB: 3.5W(max.)
120GB: 2.25W(max.)
60GB: 1.6W(max.)
Idle
480/240/120/60GB: 0.4W(typ.)
Reliability 
Wear-levelingGlobal Wear-leveling
MTBF 
(Mean Time Before Failure)
1.2 million hours
Data Protection55 bit BCH ECC 
Product Health MonitoringS.M.A.R.T
Data Retention10 years
Warranty3 years
ComplianceCE, FCC, BSMI, RoHs
 
 
Project Note File Size Update Download